Jenbacher gas engines, typical intervals for preventive maintenances

Motores-Jenbacher--intervalos-mantenimiento--Jenbacher-gas-engines-intervals-maintenance

Motores-Jenbacher--intervalos-mantenimiento--Jenbacher-gas-engines-intervals-maintenance

In this case we will try to show you the most common intervals of preventive maintenance steps on Jenbacher gas engines.

It is well know that the main Jenbacher engines on the market are: Jenbacher type 3, Jenbacher type 4 and/or Jenbacher type 6. The number of cylinders does not affect to the interval, but this is not the case with the type of gas (natural gas, landfill gas, sewerage gas, coal mine gas, syntgas…).

«RS Motor» is able to perform any type of preventive maintenance on Jenbacher gas engines. Usually preventive maintenances are performed on-site, but in case of Overhaul or major Overhaul, this could be carried out both “on-site” or in the workshop of «RS Motor».

In this case we are going to explain typical operations that «RS Motor» has to take into account when a Jenbacher engine which runs with natural gas needs PREVENTIVE MAINTENANCE.

  • For replacement of expendables/consumables like oil filters, the interval should be about 1.000 – 2.000 running hours. Then, the intermediate maintenances occur each 10.000 running hours.
  • After that, in case of Jenbacher engines type 6, the Overhauls occur at 30K and/or 60K running hours. In this case, renew of pistons, main bearings, cylinder liners… is necessary. These Overhauls can be performed “on-site” or in «RS Motor».

Apart of preventive or scheduled maintenances, sometimes the engine has unexpected failures. When this happens, «RS Motor» goes to the customer’s power plant in order to make some inspections for determining the scope of damage. Then the engine is repair taking into account its history, the running hours, etc. This situation is usually called as CORRECTIVE MAINTENANCE. The key is always to try to shorten the stop time of the power plant due t the fac that each hour the engine is stopped, means a lot of money to the final customer.

In both cases, when you need preventive or corrective maintenances, «RS Motor» is one of the best companies you have to take into account. Our large stock of Jenbacher spare parts and the several years of experience of our field engineers and workshop technicians, can solve the major part of the problems the engine has. Anyway, if the required spare parts are not in our stock, we could offer you different options like refurbished parts (con-rods, intercoolers, pumps, etc.) or supply new parts with a relatively short delivery time.

Please, feel free to contact with «RS Motor» if you have a Jenbacher engine. It does not matter where you are even nowadays. We are able to go to any country of the world.

 

Precio filtros motores de gas y diesel

 

Engine repair using an exchange “shortblock” assembled in origin

eparación-con-shortblock-en-motor-de-gas-Jenbacher-J620

Engine-repair-using-an-exchange-shortblock-assembled-in-origin

This time we show you one of the biggest repairs of year 2020. In this case, the labor was carried out on a Jenbacher J620 gas engine. In order to shorten the execution time, RS Motor installs to the customer 1x exchange “shortblock” assembled in Jenbacher.

Thanks to this, the execution time of the complete repair, on which the crankshaft of the engine of the customer was damaged, was less than 2 weeks. This is something that only few companies can carry out successfully.

In this occasion the repair was on a Jenbacher gas engine, but anyway, RS Motor has done this type of repairs many times in other Jenbacher engines and of course, in DEUTZ / MWM engines.

The exchange “shortblock/longblock” or engine exchange program of RS Motor, allows to the customers to reduce the stop time of the power plant, saving several thousands of € as a positive consequence.

The specialized team of RS Motor is able to adapt the solutions taking into account the extent of damage of the engine of the customer. Also in many cases, the install of previously Overhauled engines, is widespread when a major Overhaul is needed.

Finally, it is well know that after installing a new engine on a power plant, or after performing an engine overhaul whatever the chosen way is, the commissioning must be performed carefully. All steps from the dismantling to the final start-up are carried out by our field and/or workshop engineers and technicians. Spare parts are always original (OEM or genuine). As a consequence, RS Motor guarantees the labor, supporting us in terms of quality and an accurate execution.

Now, we are happy to show you some awesome pictures of the exchange engine “shortblock” assembled in origin (purchased directly from Jenbacher).

Also, more engines are available on this button:

venta-de-motores-usados-used-engines-for-sale-mwm-deutz-jenbacher

We hope you enjoy! Ask to us for an offer of what you need!

Jenbacher gas engines, since 2011

specialist-in-Jenbacher-gas-engines-especialistas-en-motores-de-gas-Jenbacher

specialist in Jenbacher gas engines especialistas en motores de gas Jenbacher

Jenbacher engines are one of the main business of ««RS Motor»». Trading with genuine and/or OEM parts and carrying out Service (preventive/corrective maintenance, repairs, refurbishments…) for these type of engines, allow to «RS Motor» to be the best alternative to the official brand Jenbacher since 2011.

Our customers from Spain, Portugal, and the rest of the world can confirm the efficiency of «RS Motor».

Moreover, the three brands we represent (AVAT, Heinzmann and Motortech) offer some of the best quality OEM products for Jenbacher engines. From ignition cables to actuators, and of course the innovative open and flexible solution of the DIA.NE replacement developed by AVAT (E²CON-GE), give to «RS Motor» the best knowledge available on the current cogeneration market.

On the other hand, we show you our new section in our webpage www.rsmotor.es/eng. This section presents the engines we have available. There are Jenbacher engines, MWM engines, and we hope in the future include much more brands.

Don’t forget!, If you have one of more of the following Jenbacher gas engines:

  • Jenbacher J208,
  • Jenbacher J212,
  • Jenbacher J312,
  • Jenbacher J316,
  • Jenbacher J320,
  • Jenbacher J412,
  • Jenbacher J416,
  • Jenbacher J420,
  • Jenbacher J612,
  • Jenbacher J616,
  • Jenbacher J620,

and you need parts, service, a whole engine, repair of parts like intercoolers, pumps, starters…do not hesitate to contact us!!!

Daily refurbishments and repairs in RS Motor

engines-refurbishments-and-repairs-reacondicionados-y-reparaciones-de-motores

This week we show you few examples of different refurbishments and repairs. As you can see in the pictures, «RS Motor» is able to repair and refurbish spare parts and engine parts of DEUTZ/MWM, Jenbacher and Guascor engines.

As we have shown you many times, in our own workshop of more than 750 m2 and thanks to the specific equipment, the quality of all repairs and refurbishments is unbeatable.

The «RS Motor» team is able to carry out at the same time different labors in also different engines. The most common engines we Overhaul in our facilities are:

  • Deutz/MWM TBG616/TCG2016,
  • Deutz/MWM TBG620/TCG2020,
  • Deutz/MWM TBG632/TCG2032,
  • Deutz TBD616/TBD620,
  • Jenbacher type 3,
  • Jenbacher type 4,
  • Jenbacher type 6,
  • Guascor FG, FGLD, SFGLD, HGM, SFGM ….

whatever the number of cylinders.

Every passing day «RS Motor» is improving the quality of the labor thanks to the continuous formation of our specialized technicians and engineers.

Our team is composed by highly qualified workshop technicians, field engineers, field technicians…All of them with several years of experience. Every technician or engineer of «RS Motor»r uses always original spare parts (genuine and/or OEM) purchased by the «RS Motor» technical buyers, who are always looking for the best quality products available in the market.

The final result is that, joining forces, the team of «RS Motor» results as the best alternative to the manufacturer of the engine.

Enjoy the pictures of some refurbishments in the workshop!!!

30.000 hours maintenance on a Jenbacher 620 gas engine “on-site”

overhaul-on-a-Jenbacher-620-gas-engine-motor-de-gas-jenbacher-J620

This time we show you some pictures about a 30.000 hours maintenance “on-site”. The team of «RS Motor» is executing an engine Overhaul on a Jenbacher J620 engine in the Power Plant of the customer.

For doing this, our team renews main bearings, con-rod bearings, pistons, cylinder liners, refurbish the intercooler, all con-rods, the main oil pump… All refurbishments are performed in the workshop of «RS Motor», while the installation of new parts is done “on-site” thanks to the use of specific and special tools which are adapted to carry out this maintenance.

All this labor takes around 2-3 weeks as usually. Spare parts are always original (OEM or genuine). Thanks to this, we can guarantee the labor supporting us in terms of quality and an accurate execution.

Apart of the execution of this engine Overhaul “on-site”, the workshop team of «RS Motor» is also performing some refurbishments on cylinder heads for Jenbacher type 3 and Jenbacher type 4. The wide stock of the warehouse of «RS Motor» allows to accomplish in a short time period any type of repair or maintenance. This is our daily work on our workshop (sometimes we refurbish cylinder heads, sometimes our team cleans intercoolers, sometimes we repair big piston seizures on engines, sometimes we clean flame arresters, repair starters, actuators, throttle valves, mixing valves, water pumps, exhaust gas heat exchangers, fuel pumps, injectors, oil pumps…).

We hope you enjoy with the pictures!.

OFFER REQUEST: OVERHAUL ON A JENBACHER J620 GAS ENGINE

offer-request-overhaul-on-a-Jenbacher-620-gas-engine-motor-de-gas-jenbacher-J620

Specialist on Jenbacher gas engines: maintenance, reconditioning and spare parts sale

Trabajos-y-venta-de-repuestos-en-motores-a-gas-Jenbacher

Like in DEUTZ/MWM and GUASCOR engines, RS Motor is also specialist on Jenbacher gas engines.

The use of genuine and OEM spare parts and the acquired experience allow us to perform any type of preventive or corrective maintenance whatever the Jenbacher engine type is.

The most common Jenbacher engines we work in our facilities and “on-site” are:

  • Jenbacher type 2 (J208),
  • Jenbacher type 3 (J312, J316 and J320) and
  • Jenbacher type 6 (J612, J616 and J620).

Apart of carrying out maintenances in those type of gas engines, RS Motor is able to refurbish separately each part of the engine (cylinder heads, connecting rods, main oil pumps, water pumps, starters, actuators, heat plate exchangers, intercoolers..) always using OEM and genuine spare parts. We also supply some exchange parts such cylinder heads, con-rods… and many times we can supply Jenbacher shortblocks/longblocks (according to availability).

Finally, and to conclude, we show you some pictures of our works, repairs and regular checks on Jenbacher gas engines. Enjoy them!!!

Rremembering our assistance to EMAF 2018 (Porto)

EMAF-PORTO-2018-RS-MOTOR

Some pictures of RS Motor’s first exhibition at EMAF, Porto (Portugal). Just a year ago we were together with our Portuguese neighbors exhibiting Jenbacher type 3 and Jenbacher type 4 cylinder heads, in addition to a Jenbacher type 3 intercooler.

In addition, we showed to the attendees a DEUTZ TBG616V8K engine with Motortech equipment:

  • Motortech spark plugs,
  • Motortech ignition cables,
  • Motortech Varifuel mixing system and
  • MIC Ignition box.

Apart from that, we showed several of the products and actuators from Heinzmann like the Heinzmann STG30, Heinzmann STG40, Heinzmann STG2080

Regarding DEUTZ / MWM spare parts, there were TBG620 / TCG2020, TBG616 / TCG2016 intercoolers and TBG616, TCG2016, TBG620, TCG2020 both new and exchange.

The previous elements shared a stand with the AVAT control system, the company responsible for the development of TEM-Evo in MWM engines. Being our “Certified System Partner”, we are completely able to carry out both replacements and updates (Retrofit) with the AVAT’s wide range of products and RS Motor’s experience since more than 10 years.

Finally, we would like to thank everyone who visited us at the fair again, and we hope that in case of returning to it, they will see us now and as new customers.

MOTORTECH Spark Plug Cleaning Kit

Kit-de-Limpieza-de-Bujías-de-MOTORTECH

As the current Official Distributor of MOTORTECH products for Spain and Portugal, RS MOTOR shows on its website the “MOTORTECH Spark Plug Cleaning Kit”:

This MOTORTECH kit is supplied by RS MOTOR to clean the spark plugs on the DEUTZ, MWM, Jenbacher and Guascor engines.

The kit includes a wide variety of adapters for using with spark plugs of different metrics. RS MOTOR supplies these kits for DEUTZ, MWM, Jenbacher and Guascor engines, with Denso, Champion, Beru, Motortech … spark plugs installed. The kit can also be used in spark plugs of other brands without any problem, as long as they are without prechamber.

The MOTORTECH spark plug cleaning kit supplied by RS MOTOR, is easy to use and is completely manageable. It comes inside a briefcase that facilitates its transport and protects it at all times from bumps or dirt.

For more information, contact us at rsmotor@rsmotor.es.

If you want to get to know our “partner” MOTORTECH better, visit its website.